Publish Time: 2025-07-23 Origin: Site
TK2650 is a pulsed current source device with a maximum output of 500 A pulse current, and its pulse amplitude and pulse width can be set and adjusted. The rise and fall time of pulse is less than 10 μs, and the step response performance is faster. The communication interface of the device can realize computer program control operation, which is suitable for measuring the response time of current sensor, Roche coil and other equipment, or calibrating pulse shunt, etc.
• Pulse current output: 500 A
• Pulse width: 1 ms ~ 100 ms
• Rise time: ≤10 μs
☆ Measure Current Sensor Response Time |
|
• The resulting step current signal is passed into both the standard pulse shunt in series and the current sensor under test. • Observe the waveform of the secondary signal of the shunt and sensor through the oscilloscope. • Using the rise time of the pulse signal as a reference, the response time of the tested sensor is measured. |
Watch the demonstration video to see how to use TK2650 to measure the current sensor response time.
Advanced Multifunction Calibrator Advanced Electrical Reference Standards Electric Vehicle （EV）Charging Facility Tester AC/DC Standard Source /Meter Single-phase/Three-phase Standard Meter Magnetic Parameters Measurement and Calibration Magnetic Material Testing Equipment Electrical Steel Testing Equipment