TY2100 Surface Magnetic Field Automatic Testing System

1. TY2100 Surface Magnetic Field Automatic Testing System Introduction

TY2100 Surface Magnetic Field Automatic Testing System is an equipment for automatically testing the magnetic field distribution of permanent magnet materials and motor rotor surface. It can perform fully automatic three-dimensional scanning on the surface of the specimen, automatically calculate the surface magnetic distribution of the magnetic material, the magnetic parameters of each pole, and draw the surface magnetic distribution curve.

2. Surface Magnetic Testing System Features

• Tesla Meter: Measuring range: 0～2000mT, minimum resolution: 10μT, uncertainty of measurement: 0.5%.

• Rotating Test Platform: The test platform is equipped with a rotary chuck, which is driven by a precision stepping motor to drive the tested sample to rotate in the W -axis direction.

• Chuck and Bearing: The concentricity of the standard chuck is 0.05 mm, which makes the operation more stable.

• 4 Axis Motion Control：The motion control of XYZW axis has two modes: software automatic control and manual control.

• Plane Sample Fixture (optional): Used to measure plane specimens and cube specimens.

• Radial Probe (optional): Used for surface magnetic measurement of plane specimens, cube specimens, etc.

3. Surface Magnetic Testing System Applications

• Measuring Ring Specimens

• Planar Specimens Measurement (optional)

• Surface Magnetic Parameters

• Surface Magnetic Curve

4. Surface Magnetic Testing System Specifications