• The device adopts imported protective box, which is suitable for carrying to the site for work.

• The 600 A load tank is equipped with a tie rod and rollers, which facilitate the rapid hauling of the entire equipment.

• Built-in large-capacity memory, the test data of the inspected equipment can be quickly saved on site.

• After the calibration work is completed, the original data can be exported to the computer through the U disk for sorting and analysis.

S/N

Function

AC power measurement has an oscilloscope function that displays the waveform of the AC signal under test in real time.

Calculate two types of harmonic distortion: THD/T (harmonic relative to full wave) and THD/F ( harmonic relative to fundamental wave).

The amplitude (RMS), content (%) and phase of the 2nd~128th harmonic of voltage or current can be analyzed in real time.

Visualize the spectrum of each harmonic in the form of a histogram (100% fundamental).

S/N

Function

Visual display of the measured power: The measured voltage and current measurement results are displayed at the same time

Power Trend Test: Curve the power over time in real time during the test cycle.

Power stability analysis: calculate the maximum (MAX), minimum value (min), and peak-peak value of the measured electricity ( P-P ), mean ( Avg ) , standard deviation ( S.dev ) , divergence ( Div ), etc.

Class 0.1

Class 0.05

Class 0.1

Class 0.05

50 V

100 μV

600 + 400

300 + 200

<20

<10

150 V

1 mV

600 + 400

300 + 200

<20

<10

500 V[2]

1 mV

600 + 400

300 + 200

<20

<10

Note [1]: RD is the reading value, RG is the range value, the same below. 

Note [2]: The 500 V range is optional, other ranges can be customized upon request.

Class 0.1

Class 0.05

TK6700-500A

100 A、500 A

1 mA

600 + 400

300 + 200

TK6700-1kA[4]

200 A、1 kA

10 mA

600 + 400

300 + 200

Note [3]: Users can choose the calibrator of the corresponding specification according to their needs. Other current ranges can be customized by customers. 

Note [4] TK6 700-x2 type, built-in load is 600A, if you need to complete the current measurement above 600A, you need to cascade a TK6400.

Temperature Performance

Working temperature: 0°C~45°C; 

Storage temperature: -20 °C ~ 70 °C

Humidity Performance

Operating humidity: < 80% @ 30°C, < 70% @ 40°C < 40% @ 50°C

Storage humidity: (20%~80%) R·H, no condensation

Altitude

< 3000 m

Communication Interface

USB、LAN

Size

460 mm(W) × 560 mm(D) × 250 mm(H)