TUNKIA Solution to Sensor Testing: Comprehensive and Customized

Standardized Testing (DC)

TI5000 DC Current Sensor Testing Device

Class 0.01/0.02/0.05, N*500A, short-term stability 0.003%/min, suitable for batch testing

Standardized Testing (AC/DC)

TI5300 AC/DC Current Sensor Testing Device

DC current output: (60mA~120A), class 0.01; AC current output: 60mA~120A, class 0.02

High Current Testing

TI2000 DC High Current Standard Source

Class 0.02 / 0.05, max 1000A, short-term stability 0.005%/h, suitable for batch testing

TI2100 High-Stable DC High Current Standard Source

Class 0.01, N*1.5kA, short-term stability 0.003%/FS, suitable for batch testing

TD2010 DC High Current Standard Source

Class 0.01/0.02/0.05, max 15kA, typical peak stability 15ppm, variance stability 6ppm

Small Signal Current Testing

TD1500 high-precision DC test system

Class 0.01/0.02/0.05, 1μA~120A

Standardized Testing

TI5100 DC High Voltage Sensor Testing Device

Class 0.02/0.05, 10V~N kV, short-term stability 0.01%/min

High Voltage Testing

TD2400 AC High Voltage Standard Source

Class 0.02/0.05, 100V~15kV, F: 45Hz~65Hz, harmonics: 2nd~11th

TD2500 DC High Voltage Standard Source

Class 0.02/0.05, 100V~50kV

Small Signal Voltage Testing

TD1545 DC Energy Meters Verification Device

Class 0.02/0.05, four-wire small signal voltage source: 10μV~4.4V

Standardized Testing (DC Current Sensor)

TI5000 DC Current Sensor Testing Device

Class 0.01/0.02/0.05, N*500A, short-term stability 0.003%/min, suitable for batch testing

Standardized Testing (DC Voltage Sensor)

TI5100 DC High Voltage Sensor Testing Device

Class 0.02/0.05, 10V~N kV, short-term stability 0.01%/min

High Frequency Constant Current Source

TA1200 High Frequency Transconductance Amplifier

Broadband current output: 1mA~10.5A, DC&10Hz~1MHz, short-term stability: 0.1%/min@1MHz

Pulse Voltage Source

TK2600 Pulse Voltage Source

Pulse voltage output: 200V~2kV, rise time 10μs, pulse width 1ms~100ms

Pulse Current Source

TK2650 Pulse Current Source

Pulse current output: 500A, rise time 10μs, pulse width 1ms~100ms

Soft Magnet Test

TS4000 DC Magnetic Properties Measuring System for Soft Magnetic Materials

Can be directly wound to measure the DC magnetic parameters of sensors and transformer cores, and draw relevant magnetic performance curves

TD81 Series-Soft Magnetic DC Test System

It can automatically measure the AC magnetic characteristic parameters of sensors and transformer cores in the range of 20Hz~1MHz, and draw relevant magnetic characteristic curves.

Volt-Ampere Characteristic Test

TS5400 Iron Core Volt-Ampere Characteristic Tester

Class 0.2, suitable for full testing of sensors and transformer cores